Nissan R35 GTR Injector Upgrades Now at Tunehouse!
Tunehouse are proud to announce the new 1015cc High Flow Injector kit for the R35 Nissan GTR from tuning partners EcuTek Uk!
After extensive testing and development in conjunction with Bosch Motorsport, we can offer these high quality and high performance injectors from a world leader in fuel injector design and development.
The stock GTR injectors cannot safely supply enough fuel over 580 BHP and the stock Nissan ECU code is unable to support injectors greater than 750cc.
Tunehouse can, using the unique EcuTek RaceROM patch for FlashCAN Nissan GTR install almost any size of injector. In addition, when using these high flow injectors, it is possible to achieve power outputs in excess of 1000bhp whilst retaining great low speed driveability and idle characteristics.
EcuTek have been using these injectors in a number of vehicles for the last 12 months. They are well proven and perform faultlessly!
“We are seeing significantly better atomisation than any other high flow injectors, increasing power and efficiency therefore promoting better fuel consumption. Because of the good distribution at low flow rates there are none of the usual issues that afflict engines with high flow injectors at idle and slow running.” says EcuTek.
The injectors are fully compatable with FlashCAN Nissan GTR and calibration of the injectors is as simple as making one change to the Injector Scaling map – Simple work for Owner and Tuner at Tunehouse, Jim Ghelis.
The comprehensive “plug and play” kit comes packaged with everything needed for easy
fitment including new Viton ‘O’ rings throughout and includes the following:
- 6 EcuTek “flow and impedance matched” 1015cc High flow injectors
- 6 Custom EcuTek injector harness adapters
- Detailed colour fitting and calibration instructions
The kit fits all Nissan GTR R35 models from 2008 to 2012. They are in stock and ready to ship now!
Don’t forget Tunehouse also supply high flow fuel injector kits for the 2002 – 2012 Subaru, used by Cosworth, and Litchfield on the Type 25, as well as the 2008 – 2011 EVO X, used by Mitsubishi on all the FQ400 models in the UK. These injector kits have been used on many other vehicles all over the world, from one off tunes to manufacturer special editions.
Call Tunehouse for all your EcuTek tuning needs – All Upgrades are 100% Custom Dyno tuned in house by Jim Ghelis, owner and tunere at Tunehouse for the best possible results on each and every car every time!
Email info@tunehouse.com.au or call (02) 9557 4000 for the best advise for your project!
